Zoom Remote
Training or On-Site GD&T
Training Programs
At James D. Meadows & Associates, Inc.,
we offer remote Zoom Training or we will come on-site to
provide a wide variety of GD&T courses (basic through
advanced GD&T applications), Tolerance Stack-Up Analysis
training and Dimensioning and Tolerancing of Gages and
Fixtures training, as well as other GD&T training and
support programs. We offer both packaged and customized GD&T
classes, incorporating your processes and products. Our
highly trained GD&T course personnel have spent many years
working in all areas of design, manufacturing and quality so
that your staff can have complete confidence in the GD&T
guidance that they receive.sold separately.
We offer GD&T courses with lengths from 2 1/2 to 5 days so
that we can meet your training needs and time constraints.
We provide "applications-based" GDT training on the
principles contained in the ASME Y14.5-2018, Y14.5-2009 and
ASME Y14.5M-1994 standards on Geometric Dimensioning and
Tolerancing. If requested, this GD&T training can be
tailored around your product line, knowledge level of your
staff, and design, manufacturing and inspection
requirements.
Click course titles for details and course outlines.
Level 1
Course
Geometric Dimensioning & Tolerancing [per the ASME
Y14.5-2018, Y14.5-2009 and 1994 Standards and the
Differences between them] - This comprehensive course covers
all of the basics on how to interpret, apply and measure GD&T
per ASME Y14.5-2009. This course can also include the new
principles introduced in the ASME Y14.5-2018 standard.
These Level 2 courses provide "advanced applications"
training in various aspects of Geometric Dimensioning and
Tolerancing:
Level 2
Course
Advanced Geometric Dimensioning and Tolerancing - This
course will expand, extend and reinforce the GD&T knowledge
of all who attend. It covers the most complex topics in the
Y14.5 standard and shows participants how to apply them to
any product line.
Level 2
Course
Tolerance Stack-Up Analysis - Learn to analyze tolerance
stack-ups using both plus and minus and geometric
dimensioning and tolerancing.
Level 2
Course
Dimensioning and Tolerancing of Functional Gages and
Fixtures and Variables Data Collection Analysis - Learn to
design, dimension and tolerance gages and fixtures to
inspect geometric tolerances per the new ASME Y14.43-2011
standard. Attendees will learn to apply variables data
collection methods and datum establishment by CMMs and other
inspection tools, and will learn techniques to analyze
collected variables data.
NOTE: All of the courses described above are based on the
textbooks written by James D. Meadows and/or standards he
has participated in creating. |
|
|
|
|
"Superior teaching skills.
Extremely helpful and unique that the teacher, Jim Meadows, wrote
the books." ...University of Wisconsin-Milwaukee |