|
COURSE: |
Geometric
Dimensioning and Tolerancing
[per the ASME
Y14.5-2009 and 1994 Standards and the Differences between
them] |
|
INSTRUCTOR: |
James
D. Meadows |
|
DATES: |
March 10 - 12,
2010 |
|
LOCATION: |
University of
Wisconsin-Milwaukee Center for Continuing Education (located
in downtown Milwaukee) |
|
CONTACT: |
(800) 222-3623 to enroll |
|
FOR MORE INFORMATION: |
For details regarding the program and to register online
(enrollment is on a first come, first served basis), see
http://www.sce-eng.uwm.edu This course is
listed under the Manufacturing/Industrial heading. |
 |
|
COURSE: |
Tolerance
Stack-Up Analysis |
|
INSTRUCTOR: |
James D. Meadows |
|
DATE: |
April 14 -1 6,
2010 |
|
LOCATION: |
University of
Wisconsin-Milwaukee Center for Continuing Education (located
in downtown Milwaukee) |
|
CONTACT: |
(800) 222-3623 to enroll |
|
FOR MORE INFORMATION: |
For details regarding the program and to register online
(enrollment is on a first come, first served basis), see
http://www.sce-eng.uwm.edu This course is
listed under the Manufacturing/Industrial heading. |
|
|
|
|
COURSES: |
Geometric
Dimensioning and Tolerancing
[per the ASME
Y14.5-2009 and 1994 Standards and the Differences between
them]
and/or
Tolerance Stack-Up Analysis |
|
INSTRUCTOR: |
James
D. Meadows -
nationally-recognized GD&T 'expert' and dynamic communicator
and instructor . |
|
DATES: |
December 6-8,
2010: GD&T (2 1/2 days);
December 8-10,
2010: Tolerance Stack-Up Analysis (2 1/2 days) |
|
LOCATION: |
Bevill Conference Center & Hotel, 550 Sparkman Drive,
Huntsville, AL 35816, (256) 824-4721 |
|
FEES: |
GD&T [per ASME Y14.5-2009
and 1994 Standards]: $1,410 per person;
Tolerance Stack-Up
Analysis: $1,410 per person;
[Discounts:
15% for government/government contractors or any
organizations sending 3 or more attendees from the same
location]
Click here for details |
|
HOURS: |
8 a.m. – 4 p.m. [includes
lunches except half-day sessions] |
|
ATTENDEES RECEIVE: |
●
GD&T 560-page hardcover text and corresponding
364-page workbook/answerbook [per ASME Y14.5-2009 and 1994]
written by James D. Meadows.
● Tolerance
Stack-Up Analysis, 2nd edition text-workbook/answerbook by James Meadows
●Certificate of Course Completion |
|
|
|
Disclaimer: In some instances, due to circumstances beyond our
control we may need to cancel or postpone a class. James D. Meadows &
Associates, Inc., cannot be held responsible for cancelled airfares,
cancelled hotels or any other expenses incurred by the student due to
cancellation of a class. We reserve the right to cancel or reschedule any
event. In most instances, we will know 2 to 3 weeks prior to the scheduled
class date whether a given class is a go or is cancelled.
Cancellation Policy:
SUBSTITUTIONS: Attendee substitutions can be made at any time prior
to start date of the course. CANCELLATIONS: 100% of the course fee
will be refunded if Cancellation notice is received within 15
calendar days before the start date of the course. If the cancellation is
made fewer
than 15 days prior to the first day of the class, the
registration fee is due and payable in full to James D. Meadows &
Associates, Inc. It is then advisable to send a substitute to the course.
Registrants who fail to attend on the date of the course are responsible for
the entire course fee. |
|
|